Follow these steps to send your Keynote ’08 slideshow to YouTube:

Step One
Launch Keynote 08 from the dock.

Step Two
Open the slideshow that you would like to send to YouTube.

Step Three
Select File : Send To : YouTube... from the menu.



Step Four
If you don't have a YouTube account already setup then click Add.

Step Five
Choose the Category from the pop-up menu and fill out the "Title" and "Description" fields. In the Tags field, you can type keywords to help people find your movie if they search for it on the YouTube website.

Step Six
If you don’t want your movie to be seen by anyone but you or by viewers on lists you've created, select "Private video."

Step Seven
Click Next and then click Publish to accept the terms of service offered by YouTube.

Step Eight
In the dialog that appears, click "Go To Website" to visit your movie on the YouTube website.

TO IMPORT ENTIRE IPHOTO LIBRARY

Step One
Open Aperture by selecting its icon in the dock or double clicking its icon in the Applications folder.


Step Two
Select File : Import : iPhoto Library... from Aperture's menu.


Step Three
The import window will appear and should have the iPhoto library already selected. If not, then navigate to the location of the iPhoto.


If you would like to leave the photos in the iPhoto library without copying them over to Aperture then select In their current location from the Store Files dropdown. Otherwise leave it as In the Aperture Library.


Click Choose to start the import.

A popup window will appear showing the status of the import.


Step Four
Once the import is complete you will be able to access your iPhoto Events etc from the Projects Pane to the left side of the Aperture window.



TO IMPORT SPECIFIC IPHOTO IMAGES

Step One
Open Aperture by selecting its icon in the dock or double clicking its icon in the Applications folder.

Step Two
Select File : Import : Images.. from Aperture's menu.


Step Three
From the import window that appears you can select the directory that contains your images.




Step Four
Select the images you would like to import.

Step Five
If you would like to leave the photos in the iPhoto library without copying them over to Aperture then select In their current location from the Store Files dropdown. Otherwise leave it as In the Aperture Library.


Step Six
Click the import button to import the selected images.


Step Seven
A popup will appear asking you to confirm your import. In my case I was only importing one image so i selected the Import 1 Image button.


Step Eight
Once import is complete a Import Complete popup will appear. Click Ok to close the popup.


Step Nine
You will now be able to find the image by using the Projects Pane on the left hand side of the Aperture window.

There are two types of reset you can perform on your Apple Extreme Base Station.

If you forgot your base station password and can no longer configure the Airport Extreme you should perform a Soft Reset.

If your AirPort stopped responding or has serious accessibility issues you can revert back to default factory configuration by performing a Hard Reset.

SOFT RESET
The AirPort Extreme must be connected to power during the following steps.

Step One
Disconnect any Ethernet cables from the base station.

Step Two
Select System Preferences... from the Apple menu at the top left hand corner of the screen.


Step Three
Click the Network icon to open the Network Preferences.


Step Four
Select Airport from the list of connections on the left.


Step Five
Click the Advanced button.

Step Six
Click to select the TCP/IP tab.


Step Seven
Set the Configure IPv4 to Using DHCP.

Step Eight
Press and hold the base station reset button for one full second. The base station remains in reset mode for five minutes. If you do not make your changes within five minutes of pressing the reset button, the base station will revert to the previous configuration.


Note: Holding the reset button for 5 seconds or longer will do a hard reset. AirPort will indicate if it's in hard reset mode by blinking faster.

Step Nine
From the AirPort menu bar item, choose the network created by the base station (the network name does not change).


Step Ten
Open the Airport Utility from the Applications : Utilities folder.

Step Eleven
Locate and double-click your base station to configure it.


Step Twelve
Ignore the errors in Base Station Status at this time. You now have the opportunity to change settings such as base station password, network password, the Access Control List, and RADIUS.


- To reset base station password, choose Base Station tab and edit the password field.
- To change the network password, choose the Wireless tab and edit the Wireless password field. Or, turn on encryption (WPA2 is recommended) and enter a new password for your AirPort network.
- Unless you have been given an IP address by your ISP or system administrator, do not change the IP address.

Step Thirteen
Click Update. The base station restarts to load the new settings. Plug back in the Ethernet cable and reconnect to your network.


HARD RESET
If your AirPort Extreme has firmware 5.5.1 or later follow these steps:

Step One
Push and hold the reset button.

Step Two
Continue holding it until you see the center status light (LED) start to flash rapidly, which should happen after about five seconds.

Step Three
Release the button, and AirPort Extreme will reset.

To install and setup your Airport Extreme Base Station follow these steps:

Step One
First lets unpackage the Airport Extreme and hook it up. Plug in the AC adapter to the back of the Base Station. Don't plug it into the wall just yet. Plug your modem into the Internet WAN port.


Step Two
Insert the Install CD into your computer. A popup will appear showing the contents of the CD. Double Click Airport to begin the install process.


Step Three
Click the Continue button to install the Airport Software.


Step Four
Again click the Continue button to move past the Read Me Information.


Step Five
Click Continue to accept the software license agreement.


Step Six
Click Agree from the popup menu to confirm acceptance of the software license agreement.


Step Seven
Click the Install button to finally begin installation.

Step Eight
You may be asked to enter an administrative username and password. Enter these then click the Ok button.


Step Nine
Once the installation has complete click the Close button to close the installation window.


Step Ten
Now you can plug the AC Adapter into the wall outlet.

Step Eleven
Give the Base Station a few minutes to boot. If you are going to set up your Airport Extreme using a wireless connection then click the Airport icon at the top right hand corner of the screen. Select the Apple Network from the dropdown. NOTE*: If you connected your computer to the Base Station using an ethernet cable you can skip this step.


Step Twelve
Open a new Finder window and run Airport Utility from within Applications : Utilities.


Step Thirteen
Airport Utility will search and find the connected Airport Extreme. Click the Continue button to set up your base station.


Step Fourteen
To personalize your Airport Extreme name you wireless network and name your base station. Then click the Continue button to continue setup.


Step Fifteen
Select your country from the Country dropdown menu. Then select your Radio Mode. The most common setting is 802.11n (802.11b/g compatible). This setting will work with most computers today. If all of your computers are capable of 802.11n this setting can be changed later. Click the Continue button to continue setup.


Step Sixteen
Select the security for your network. WPA2 Personal is the most secure. Then enter a username and password for your wireless network. If you do not wish to password protect your wireless network then select No Security. Click the Continue button.


Step Seventeen
Select how you connect to the Internet. If you use DSL and need to enter a username and password then select I use a DSL or cable modem using PPP over Ethernet (PPPoE. If you don't want to connect to the internet then select I am not ready to connect to the Internet right now. Click the Continue to continue setup.


Step Eighteen
Enter your connection information. Set your Account Name, Password, and Service Name. Usually you would have your Connection set to Always On. Click the Continue button to continue setup.


Step Nineteen
Enter a password for users to type when connecting to USB Disks. I selected With base station password from the Secure Shared Disks dropdown to use my base station password to access USB disks.

Choose the amount of access allowed for guests. I selected Not allowed from the Guess Access dropdown.

Click the Continue button to continue setup.


Step Twenty
Enter a base station password to protect the base stations settings. Then click the Continue button to continue.


Step Twenty One
Airport Utility will show you a window summarizing your setup. Click the Go Back button to go back and change something. If you are happy with the settings click the Update button.


Step Twenty Two
Wait for the Airport Extreme to restart and update your settings.


Step Twenty Three
Once the Airport Extreme has restarted you will get a Congratulations window indicating that your Base Station has been successfully setup!


Press the Done button to finish the setup process. Notice the light on your Airport Extreme Base Station will be green letting you know that everything is working properly.