iPhoneの脱獄 方法は網のまわりでAppleがiPhoneファームウェア更新を出すたびに出現する。 私は私のiPhoneの脱獄をこの前の8月行った従ってAppleがiTunesのringtonesを買うことを可能にした前に私は私の電話に注文のringtonesをアップロードできる。
Appleがそれを禁止するが、Jailbreakingについての大きい事はあなたのiPhoneに各種各様のサードパーティ製のアプリケ−ションを非常に加え、機能性を高めることができることである。 2月では、Appleは最終的に第三者の開発者がそうそこにもはや脱獄のための必要性であるかもしれないiPhoneのための原産適用を作成することを可能にしない。
その間、各iPhoneファームウェア更新の後で、iPhoneは元通りになり、あなたが完了するためにそう退屈に働いた脱獄は取消される。 それから、iPhoneの開発者はaと上がるために急いで働く 新しい iPhoneの脱獄方法およびあなたはまたはあなたのiPhoneファームウェアを全然更新してはいけない全体にわたって-どちらかを始めなければならない。
私はJailbreakingで私のiPhoneの問題を有し、Appleの店にそれにJailbrokenを運ばなければならなかったら私が私の保証を無効にすることを恐れていたので)私が感じたaので私のiPhoneをあきらめた口論のあまり、脱獄を取付け、新しい脱獄方法およびbに遅れずについていくためにだったことを)。 あなたについての何か。
脱獄か。
次の投票の投票はコメントのあなたの経験を共有し。
[ノート: このポストの投票に加わるためにこのポストの内で埋め込まれる投票が訪問する場所を。ある]
クリス著書かれている 2008年1月30日 with コメント無し.
より多くの記事を読みなさい iPhoneは切り刻む.
iPhoneの世界:
iPhone v1.1.3の脱獄の刻み目のMac版は今利用できる。 おそらくインターフェイスはで程に豪華ではない Windows v1.1.3の脱獄の刻み目、しかしそれはそれにもかかわらず働く。
ダウンロード: MacのためのiPhone v1.1.3の脱獄の刻み目
MAC版- 1.1.3個のパッケージメーカーをダウンロードし、それを開け、そしてRun_Thisを動かしなさい。 必要な場合注意深く読まれる、入る押せば、イメージはあなたの電話にアップロードされる。
そしてここにまだ有用の他の版からの指示はここにある。
- 1.1.1から始めれば1.1.2は取付けられているInstaller.appの電話をjailbroken。
-あなたのコンピュータにUSBであなたの電話のプラグを差し込みなさい。
-ダウンロード、エキスおよび操業
- Program will determine what firmware you are running on your phone and make sure you can run the update.
- Program will then guide you through the process of obtaining and modifying the 1.1.3 firmware (make sure to read everything thoroughly).
- Program will upload the new firmware image to your phone. Note that this only puts the file on your phone and does not modify it at all, yet.
- When finishes (should take about 10 minutes), it will tell you to go to Installer and install the “1.1.3 soft upgrade” package. Do that.
- When the installer finishes (this should take another 10-15 minutes), your phone should reboot with a fresh activated 1.1.3 firmware.
And now for the credits:
Props to everyone on the Dev Team, including (in no particular order): netkas, NerveGas, asap18, bgm, Bugout, bushing, chris_, dinopio, drudge, Fred_, gray, MuscleNerd, natetrue, pr3d4t0r, roxfan, Turbo, Zf[strike], np101137, pumpkin, and kroo, along with many contributors who wish to remain anonymous.
And props to Fred_ and planetbeing, who were among the first with a 1.1.3 jailbroken iphone, and Zibri, by whom this method was largely developed. Additionally to Shaun Erickson, who packaged the Installer half of the upgrade, and runs most of the application packaging for the iPhone. He’s looking for a job too - hire him!
Additionally, members of the iPhone Elite team also played a part.
©2008 iPhone World. All Rights Reserved.
.
Written by dennis on January 25th, 2008 with no comments.
Read more articles on iPhone Hacks and iPhone News and News and iPhone Programs and iPhone Downloads.
iPhone World:
iPhone Dev Team and iPhone Elite Team have put their minds together and finally managed to release an iPhone firmware v1.1.3 jailbreak to the public, in the form of a new version of iBrickr.
To use this iPhone v1.1.3 jailbreak hack you will first need to have 1.1.2 or 1.1.1 jailbroked phone. Once your iPhone is ready for the above requirement, you will need the iBrickr image creator (It’s only available on Windows for now, sorry Mac users) which you can download directly here!
Then do the following:
- Plug in your phone via USB to your computer and run iBrickr.
- iBrickr will determine what firmware you are running on your phone and make sure you can run the update.
- iBrickr will then guide you through the process of obtaining and modifying the 1.1.3 firmware (make sure to read everything thoroughly).
- iBrickr will upload the new firmware image to your phone. Note that this only puts the file on your phone and does not modify it at all, yet.
- When iBrickr finishes (should take about 10 minutes), it will tell you to go to Installer and install the “1.1.3 soft upgrade” package. Do that.
- When the installer finishes (this should take another 10-15 minutes), your phone should reboot with a fresh activated 1.1.3 firmware.
There is also a way to get Google Maps Locations working with jailbroken 1.1.3:
*You must have a legal simcard (at&t, orange, o2,t-mobile)
*jailbreak it (see above).
*Then just replace /usr/libexec/lockdownd with original one, from 1.1.3
*Your phone will have Google Maps Locations working.
Now you may be wondering how this jailbreak works. Here is a breakdown:
- iBrickr grabs the 1.1.3 iPhone firmware image and extracts, decrypts, and decompresses the disk image.
- Then it applies a patch, jailbreaking the disk image and activating it, and installing Installer.app.
- It uploads this new modified image to the phone, as 113_upgrade_image.bin.
- The “1.1.3 soft upgrade” app flashes the phone with the image and reboots.
- You have a perfect, jailbroken, upgraded 1.1.3 phone, with all your settings and music intact!
Thanks: netkas
©2008 iPhone World. All Rights Reserved.
.
Written by David on January 24th, 2008 with no comments.
Read more articles on iPhone Hacks and iPhone News and News.
iPhone World:
A lot of our readers are probably familiar with TurboSim - one of the first hardware based iPhone unlockers that tricks the device into thinking that it’s working with an authentic AT&T sim card through a process called double-booting ― which consists of the user attaching the TurboSim to his real card.
The original TurboSim was made by a Czech company called Bladox, whose online store does not accept orders at the moment. But Taiwanese manufacturer Taiwan Star Telecom (who manufacture MagicSim) made their own version of the TurboSim.
According to the description it works on latest OTB (out of the box) v1.1.2 iPhones (week 45 or newer), with 3G Sim card support and with STK function support.
While we can’t verify that this works, a demonstration video (below) is provided. For more information see the manufacturer’s website.
©2008 iPhone World. All Rights Reserved.
.
Written by dennis on January 24th, 2008 with no comments.
Read more articles on iPhone Hacks and News and iPhone Asia.
iPhone World Ads: iPhone Accessories - Free iPhone - Unlimited iPhone Downloads - iPhone Games - Free iPod Touch
It appears that iPhones defences could not last a week from the furious attempts by hackers to jailbreak the device. Nevertheless, after many attempts, it finally gave up; some talented people have managed to jailbreak it.
In case our reader forgot, jailbreaking means that you can install unofficial 3rd party apps. Unfortunately, it is not going to be released to public yet, since jailbreaking 1.1.3 version is too complex for regular user without the knowledge of electronics to accomplish.
Here is YouTube video of an iPod Touch that was jailbroken in the same manner for sceptics out there.
We are eagerly awaiting its public release.
Thanks: TheRegister
©2008 iPhone World. All Rights Reserved.
.
Written by David on January 22nd, 2008 with no comments.
Read more articles on iPhone Hacks and iPhone News and News.
« Older articles
No newer articles
